
	Promise FastTrak Series BIOS Upgrade Utility [12/20/2002]
	

[INSTALLATION]


1.1 Make a BIOS Upgrade Disk
    
    a. Insert a blank floppy disk into the floppy drive.

    b. Using an unzip utility, extract the files from the 
       BIOS ZIP file to the floppy disk

    c. Label the diskette "FastTrak BIOS Utility Disk" and remove
       the disk from the floppy drive. 

1.2 Boot your system 

    a. Insert a DOS Boot Disk in the floppy drive.

    b. Turn on your system.

    c. When your system boots to the command line, remove the Boot Disk from
       the floppy drive. 
     		
1.3 Upgrade the FastTrak BIOS

    a. Insert the FastTrak BIOS Utility Disk into the floppy drive.

    b. At the A:\> prompt, type DIR and press Enter to see the name of the
       BIOS upgrade (.bin) file.

    c. At the A:\> prompt, type the following:

                  pflash /f XXXbXXXX.bin

       Where XXXbXXXX.bin is the name of the upgrade BIOS file, identified in
       step b, above.

    d. Press Enter. The utility will report the following:

                  Updating card 0 ....OK.

    e. Remove the FastTrak BIOS Utility Disk and reboot your system.

This completes the BIOS upgrade procedure.


Syntax : PFLASH /? - help
	 PFLASH /f [path] filename.bin - Update BIOS from file.
	 PFLASH /s [path] filename.bin - Save BIOS image to file.
	 PFLASH /e Erase BIOS on controllers.
